Key Features
- IEC 60320 C20 plug to C19 connector
- C20 plug mates with standard C19 outlets on PDUs, UPS systems, and high-current power sources
- C19 connector mates with any standard C20 inlet on servers, blade chassis, switches, and storage arrays
- Rated for 20 Amps, 250V AC
- US & Canada - cULus certified
- 6.1 Meters / 20 Feet cord length
Documentation
- Technical Drawing
- Certificate of Compliance
- Certificate of Origin
- REACH Compliance
- RoHS Compliance
- Prop 65 Declaration
- WEEE Compliance
- Product Lifecycle Statement
- ISO 9001:2015 QMS Certificate
Specifications
| Male Plug | IEC320 C20 |
| Female Connector | IEC320 C19 |
| Amperage | 20 Amps |
| Voltage | 250 Volts |
| Cable Jacket | North America SJT |
| Length | 6.1 Meters / 20 Feet |
| Tolerance | ± 80 mm / ± 3.2 inches for molded cords± 150 mm / ± 6 inches for mechanical cords |
| Color | Black |
| Conductor Color Code | Black, White, Green | North American Color Code (NACC) |
| Conductor Count | 3 wires |
| Gauge | 12 AWG |
| Jacket Material | PVC |
| Jacket Temperature Rating | 105° C |
| Outside Diameter | 11.9-12.3mm |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Certification(s) | US & Canada - cULus |
| Packaging | Coiled |
Application Notes
IEC 60320 C20 to C19 power cords are rack jumper cords designed to connect high-current equipment to a PDU or UPS in data center and server room environments. The C20 plug on one end mates with a standard C19 outlet commonly found on rack PDUs and UPS systems, while the C19 connector on the other end delivers power to equipment with a standard C20 inlet — including blade servers, high-density switches, and storage arrays.
Black power cords are the standard choice for data center and server room deployments, providing a clean, unobtrusive appearance that complements most rack equipment and accessories.
C20 to C19 cords are ideal for high-density data center deployments, blade server chassis, large UPS systems, and high-current PDU distribution where reliable, high-current power delivery is required.
Product FAQs
What is a C20 to C19 power cord used for?
C20 to C19 cords are rack jumper cords. The C20 plug mates with a C19 outlet on a PDU or UPS, and the C19 connector delivers power to equipment with a C20 inlet — such as blade servers, high-density switches, and storage arrays.
What is the difference between a C19 and a C13 connector?
The C19 is a higher-current connector rated for up to 20A and is used with equipment that requires more power than a standard C13 cord can deliver. C13 cords are rated for up to 15A and are used with standard servers and networking equipment.
Is a C20 to C19 power cord grounded?
Yes. The C20 plug includes a protective earth pin that carries ground from the source through the cord to the equipment.
