The NETGEAR M4350-32F8V (XSM4340FV) is a Layer 3 fully managed M4350 switch with 32 x 10G SFP+ and 8 x 25G SFP28. It is aimed at AV-over-IP and enterprise networks that need multi-gigabit access, Virtual Chassis stacking and centralized management with NETGEAR Engage.
Key features
- 32 x 10G SFP+; uplinks: 8 x 25G SFP28
- 40-port fiber aggregation switch
- Layer 3 feature set: static, policy-based and dynamic routing
- Virtual Chassis stacking with non-stop forwarding (NSF) and hitless failover
- Managed with NETGEAR Engage Controller and AV web UI/profiles
Specifications
| Access ports | 32 x 10G SFP+ |
|---|---|
| Uplinks | 8 x 25G SFP28 |
| PoE | None |
| Layer | Layer 3 (static, policy-based and dynamic routing) |
| Stacking | Virtual Chassis stacking (NSF, hitless failover) |
| Management | NETGEAR Engage Controller, AV web UI |
| Form factor | 1U rack-mount (brackets included), desktop footpads |
| Power supply | 420 W internal PSU + 1 slot for modular PSU (APS600Wv3, APS1200Wv2, APS2000Wv2), 1+1 redundancy |
| Dimensions (W x H x D) | 17.32 x 1.7 x 15.75 in |
| Weight | 15.32 lb |
| Warranty | NETGEAR limited lifetime hardware warranty |
Frequently asked questions
Does this switch support PoE?
No. NETGEAR lists PoE ports/budget as N/A for this model.
What power supply does it use?
420 W internal PSU + 1 slot for modular PSU (APS600Wv3, APS1200Wv2, APS2000Wv2), 1+1 redundancy
Can it be stacked?
Yes. The M4350 uses Virtual Chassis stacking with non-stop forwarding and hitless failover; NETGEAR's product page does not state a maximum unit count.
Source: official NETGEAR datasheet.
- Access ports:
- 32 x 10G SFP+
- Uplinks:
- 8 x 25G SFP28
- PoE:
- None
- Layer:
- Layer 3 (static, policy-based and dynamic routing)
- Stacking:
- Virtual Chassis stacking (NSF, hitless failover)
- Management:
- NETGEAR Engage Controller, AV web UI
- Form factor:
- 1U rack-mount (brackets included), desktop footpads
- Power supply:
- 420 W internal PSU + 1 slot for modular PSU (APS600Wv3, APS1200Wv2, APS2000Wv2), 1+1 redundancy