Key Features
- VS-Lock IEC 60320 C14 to C15 power cord — locks at both ends
- VS-Lock C14 plug secures to both V-Lock and W-Lock compatible PDU C13 outlets
- S-Lock C15 connector locks to any standard C14 or C16 inlet
- Rated for 15 Amps, 250 Volts AC
- Black jacket suitable for data center, server, and mission-critical use
- 2.5 Meters / 8 Feet cord length
Documentation
- Technical Drawing
- Certificate of Compliance
- Certificate of Origin
- REACH Compliance
- RoHS Compliance
- Prop 65 Declaration
- WEEE Compliance
- Product Lifecycle Statement
- ISO 9001:2015 QMS Certificate
Specifications
| Male Plug | IEC320 C14 V-Lock |
| Female Connector | IEC320 C15 S-Lock |
| Voltage | 250 Volts |
| Amperage | 15 Amps |
| Length | 2.5 Meters / 8 Feet |
| Tolerance | ± 35 mm / ± 1.4 inches for molded cords± 50 mm / ± 2 inches for mechanical cords |
| Gauge | 14 AWG |
| Conductor Count | 3 wires |
| Cable Jacket | SJT |
| Color | Black |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Certification(s) | UL Listed |
Application Notes
IEC 60320 C14 to VS-Lock C15 power cords lock at both ends of the power path. The VS-Lock C14 plug is compatible with both V-Lock and W-Lock PDU C13 outlet systems.
On the equipment end, the S-Lock C15 connector locks to any standard C14 or C16 inlet without requiring a proprietary or notched inlet on the device. Together, the VS-Lock plug and S-Lock connector deliver dual-end locking connections in a single cord across a wide possible range of PDUs and equipment.
Product FAQs
How does a VS-Lock C14 to C15 cord work?
The VS-Lock C14 plug locks into compatible V-Lock and W-Lock PDU C13 outlets, securing the cord at the power source. The S-Lock C15 connector on the equipment end locks to any standard C14 or C16 inlet. The result is dual-end locking across a wide range of PDUs and equipment.
Does the equipment need a special inlet for the S-Lock C15 end to lock?
No. The S-Lock C15 connector is universal and locks to any standard C14 or C16 inlet. No proprietary inlet is required.
What devices use a C14 to VS-Lock C15 power cord?
These cords are commonly used with servers, switches, routers, storage units, and other C14-equipped equipment where an inadvertent power disconnect would cause downtime, data loss, or safety concerns.
