Key Features
- Dual Lock IEC 60320 C14 to C19 power cord — locks at both ends
- P-Lock C14 plug secures to compatible PDU C13 outlets — prevents inadvertent disconnects at the PDU side
- S-Lock C19 connector locks to any standard C20 inlet
- C19 connector mates with C20 inlets, the standard high-current inlet on servers, switches, and storage equipment
- Compatible with ServerTech, Chatsworth (CPI), Raritan, Vertiv, Knurr, and NextGen Eaton PDUs fitted with notched C13 outlets
- Rated for 15 Amps, 250 Volts AC
- Black jacket suitable for data center, server, and mission-critical use
- 1.8 Meter / 6 Feet cord length
Documentation
- Technical Drawing
- Certificate of Compliance
- Certificate of Origin
- REACH Compliance
- RoHS Compliance
- Prop 65 Declaration
- WEEE Compliance
- Product Lifecycle Statement
- ISO 9001:2015 QMS Certificate
Specifications
| Male Plug | IEC320 C14 P-Lock |
| Female Connector | IEC320 C19 S-Lock |
| Voltage | 250 Volts |
| Amperage | 15 Amps |
| Length | 1.8 Meter / 6 Feet |
| Tolerance | ± 50 mm / ± 2 inches for molded cords± 100 mm / ± 4 inches for mechanical cords |
| Gauge | 14 AWG |
| Conductor Count | 3 wires |
| Conductor Color Code | Black, White, Green | North American Color Code (NACC) |
| Outside Diameter | 9.27-9.91mm |
| Cable Jacket | North America SJT |
| Jacket Material | PVC |
| Jacket Temperature Rating | 105° C |
| Color | Black |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Certification(s) | US & Canada - cULus |
| Packaging | Loose & Bundled |
Application Notes
IEC 60320 C14 to C19 Dual Lock power cords eliminate inadvertent disconnects at both ends of the power path. The P-Lock C14 plug secures to the notched C13 outlets found on compatible PDUs — including ServerTech, Chatsworth (CPI), Raritan, Vertiv, Knurr, and NextGen Eaton models — locking the cord firmly at the power source. The S-Lock C19 connector on the equipment end locks to any standard C20 inlet, providing universal equipment-side retention without requiring a proprietary inlet on the device.
The C19 connector is the standard high-current connector for enterprise IT hardware, mating with the C20 inlets found on servers, blade chassis, network switches, and storage arrays. By combining P-Lock on the plug end and S-Lock on the connector end, these cords deliver comprehensive dual-end connection security across a wide range of PDUs and equipment.
C14 to C19 Dual Lock cords are well suited for data centers, network closets, and mission-critical rack environments where equipment with C20 inlets is powered from P-Lock compatible PDUs and both ends of the connection must be secured.
Product FAQs
What is a C14 to C19 Dual Lock power cord?
A Dual Lock power cord locks at both ends. The P-Lock C14 plug secures to the notched C13 outlets on compatible PDUs, and the S-Lock C19 connector locks to any standard C20 inlet on the equipment side — providing complete connection security across the full power path.
Which PDUs are compatible with the P-Lock C14 plug?
The P-Lock C14 plug is compatible with PDUs fitted with notched C13 outlets, including models from ServerTech, Chatsworth (CPI), Raritan, Vertiv, Knurr, and NextGen Eaton.
Does the equipment need a special inlet for the S-Lock C19 end to lock?
No. The S-Lock C19 connector is universal and locks to any standard C20 inlet. No proprietary inlet is required.
What is the difference between a C19 and a C21 connector?
The C19 is the standard high-current connector and mates with C20 inlets. The C21 is a higher-temperature version (rated up to 155°C) that mates with both C20 and C22 inlets. For equipment with a standard C20 inlet, a C19 connector is the typical choice; a C19 will not fit a C22 inlet.
What devices use a C14 to C19 Dual Lock power cord?
These cords are commonly used with servers, blade chassis, managed network switches, storage arrays, and other equipment with C20 inlets where secure locking connections at both ends are required.
