Key Features
- IEC 60320 C14 plug to NEMA 5-20 connector
- Extends PDU power to NEMA-inlet equipment directly from an IEC outlet
- Rated for 15 Amps, 125 Volts
- 14 AWG conductors
- North America SJT cable jacket
- 0.3 Meter / 1 Feet cord length
Documentation
- Technical Drawing
- Certificate of Compliance
- Certificate of Origin
- REACH Compliance
- RoHS Compliance
- Prop 65 Declaration
- WEEE Compliance
- Product Lifecycle Statement
- ISO 9001:2015 QMS Certificate
Specifications
| Male Plug | IEC320 C14 |
| Female Connector | NEMA 5-20 |
| Voltage | 125 Volts |
| Amperage | 15 Amps |
| Length | 0.3 Meter / 1 Feet |
| Tolerance | ± 30 mm / ± 1.2 inches for molded cords± 35 mm / ± 1.4 inches for mechanical cords |
| Conductor Gauge | 14 AWG |
| Conductor Count | 3 wires |
| Conductor Color Code | Black, White, Green | North American Color Code (NACC) |
| Outside Diameter | 9.1-9.5mm |
| Cable Jacket | North America SJT |
| Jacket Material | PVC |
| Jacket Temperature Rating | 105° C |
| Color | Black |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Certification(s) | US & Canada - cULus |
| Packaging | Loose & Bundled |
Application Notes
IEC 60320 C14 to NEMA 5-20 power cords allow NEMA-inlet equipment to be powered directly from a C13-outlet PDU or power strip, bridging IEC and NEMA power standards within the same installation. This eliminates the need for additional adapters or separate outlet types when deploying mixed IEC and NEMA equipment in the same rack or environment.
These cords are commonly used in data centers, lab environments, and AV installations where a C13-outlet PDU is the primary power distribution source and some connected equipment uses NEMA plugs rather than IEC connectors. A single PDU can serve both IEC and NEMA devices without requiring a separate power strip or outlet type.
C14 to NEMA 5-20 cords are well-suited for any environment where flexibility between IEC and NEMA power standards is required at the rack or device level.
Product FAQs
Why use a C14 plug with a NEMA connector?
A C14-to-NEMA cord allows equipment with a standard NEMA plug to be powered directly from a C13-outlet PDU. This is useful in mixed environments where IEC-outlet PDUs are the primary power source but some devices use NEMA plugs — eliminating the need for a separate power strip or adapter.
What amperage rating should I select?
The cord's amperage rating is determined by its lowest-rated component — typically the connector or the wire gauge. Select the rating that matches your circuit and load requirements, and ensure it does not exceed the capacity of your source outlet or circuit breaker.
How do I choose the right conductor gauge?
Conductor gauge determines the current-carrying capacity of the cord. A heavier gauge (lower AWG number) supports higher amperage loads, while a lighter gauge (higher AWG number) is more flexible and suited for lower-load devices. Always select a gauge that meets or exceeds the amperage requirements of your circuit and connected equipment.
