Key Features
- Standard IEC 60320 C14 plug to C7 connector
- C7 is a 2-pin non-polarized connector — no ground required
- Rated for 2.5 Amps, 250 Volts
- 18 AWG conductors
- North America SPT-2 cable jacket
- 0.3 Meter / 1 Feet cord length
Documentation
- Technical Drawing
- Certificate of Compliance
- Certificate of Origin
- REACH Compliance
- RoHS Compliance
- Prop 65 Declaration
- WEEE Compliance
- Product Lifecycle Statement
- ISO 9001:2015 QMS Certificate
Specifications
| Male Plug | IEC320 C14 |
| Female Connector | IEC320 C7 |
| Voltage | 250 Volts |
| Amperage | 2.5 Amps |
| Length | 0.3 Meter / 1 Feet |
| Tolerance | ± 30 mm / ± 1.2 inches for molded cords± 35 mm / ± 1.4 inches for mechanical cords |
| Conductor Gauge | 18 AWG |
| Conductor Count | 2 wires |
| Conductor Color Code | Black, White | North American Color Code (NACC) |
| Outside Diameter | 6.6-7.0mm |
| Cable Jacket | North America SPT-2 |
| Jacket Material | PVC |
| Jacket Temperature Rating | 105° C |
| Color | Black |
| Testing | Each cord is tested for dielectric voltage-withstand (Hi-Pot), polarization and continuity. |
| Packaging | Loose & Bundled |
| Certification(s) | None |
Application Notes
IEC 60320 C14 to C7 power cords connect a standard C14-outlet PDU or power strip to equipment with a C8 inlet. The C7 connector — commonly known as the figure-8 or shotgun connector — is a 2-pin non-polarized connector used on a wide range of small electronics, including laptop power supplies, portable audio equipment, game consoles, and other compact devices that do not require a ground connection.
Using a C14-to-C7 cord allows C8-inlet equipment to be powered directly from a rack-mounted or desktop PDU, eliminating the need for separate wall adapters and consolidating power connections in mixed-equipment environments.
C14 to C7 cords are well-suited for AV installations, network closets, lab environments, and any setting where C8-inlet devices need to be powered from a centralized C14-outlet power source.
Product FAQs
What equipment uses a C7 connector?
The C7 connector — commonly known as the figure-8 or shotgun connector — is used on many small electronics including laptop power supplies, portable audio equipment, game consoles, and compact devices that do not require a ground connection. It mates with C8 inlets.
Why use a C14 plug with a C7 connector?
A C14-to-C7 cord allows C8-inlet equipment to be powered directly from a C14-outlet PDU or power strip, eliminating the need for separate wall adapters. This simplifies cable management and consolidates power distribution in AV, lab, and mixed-equipment environments.
Is the C7 connector polarized?
No. The standard C7 connector is non-polarized, meaning it can be inserted in either orientation. Some equipment may use a polarized version — verify your device's inlet type before ordering.
What amperage rating should I select?
The cord's amperage rating is determined by its lowest-rated component — typically the connector or the wire gauge. Select the rating that matches your circuit and load requirements, and ensure it does not exceed the capacity of your source outlet or circuit breaker.
